Files
overwatch/README.md
thebadking b3608ecfd7
Some checks failed
AERIS-10 CI / Python Lint + Tests (push) Has been cancelled
AERIS-10 CI / MCU Firmware Tests (push) Has been cancelled
AERIS-10 CI / FPGA Regression (push) Has been cancelled
AERIS-10 CI / Cross-Layer Contract Tests (push) Has been cancelled
Rename the simulator to Overwatch and organize the repository for presentation.
The operator interface now uses that name. The radar design, parts list, and simulation sit in separate directories, and the earlier simulator and project license are removed.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 06:04:46 +00:00

56 lines
2.3 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# AERIS-10
10.5 GHz pulse linear-FM phased-array radar, with Overwatch beside the hardware design.
| | |
|---|---|
| [simulation/](simulation/) | Overwatch. Physics, radar model, and the operator view. |
| [schematics/](schematics/) | Board schematics, stack-up, and production Gerbers. |
| [parts/parts-list.csv](parts/parts-list.csv) | Parts list taken from the production bills of materials. |
| [parts/cost.md](parts/cost.md) | Cost: the bills of materials do not contain prices. |
## Radar
Two builds share the signal chain.
- **AERIS-10N**, about 3 km, 8×16 patch array.
- **AERIS-10X**, about 20 km, 32×16 dielectric-filled slotted waveguide, plus a 10 W QPA2962 stage on each of 16 amplifier boards.
The array steers elevation electronically over ±45°. Azimuth on the prototype is a stepper. Carrier is 10.5 GHz. The FPGA does chirp generation, pulse compression, Doppler, MTI, and CFAR. An STM32 sequences power, clocks, phase shifters, and the GPS/IMU.
![Antenna array](hardware/mechanical/Antenna_Array.jpg)
![System diagram](hardware/diagrams/RADAR_V6_V2.png)
### Where the rest of the design lives
| Path | Contents |
|---|---|
| `schematics/4_6_Schematics/` | Main board, power board, frequency synthesizer, power amplifier, antennas |
| `schematics/4_7_Production Files/` | Gerbers, pick-and-place, and the original board bills of materials |
| `parts/datasheets/` | Component datasheets |
| `hardware/diagrams/` | Functional diagram |
| `hardware/power/` | Power-rail and sequencing sheet |
| `hardware/description/` | Project description |
| `hardware/rf-simulations/` | Antenna, filter, and waveguide studies. These are circuit simulations, not Overwatch. |
| `hardware/mechanical/` | Enclosure and waveguide drawings |
| `hardware/application-notes/` | ADAR1000 user guide |
| `firmware/` | STM32, FPGA, and the radar GUI |
| `docs/` | Architecture notes, bring-up, and reports |
## Overwatch
From the repository root:
```bash
cd simulation
python -m pip install -e '.[server,dev,flight,performance]'
python -m defense_sim.cli --steps 500 --seed 7
```
The earlier simulator, the standalone scripts and the single-page viewer that used to sit in the repository root, has been removed.
## Contact
Nawfal Motii, ABAC INDUSTRY. Technical questions go through the project issue tracker. Collaboration and business inquiries: nawfal.motii.33 [at] gmail [dot] com.